Civil engineering interview questions.
In this article we discuss top 15 civil engineering interview questions .
1. What is grouting ?
A. Grout may be a fluid sort of concrete which is employed to fill the voids.
Q 2. what's allowable moisture content in Fine aggregate for the concrete mix?
A. We won’t use the mixture if its moisture content is quite 5%.
Read now👇
👉Doubly reinforcement beam section
Q 3. What does one mean by segregation?
A. Segregation may be a separation of cement, sand from aggregate. this is often caused thanks to Water cement ratio and when concrete is poured about quite 1.5m
Q 4. what's Seepage?
A. Slow percolation of water through soil is named Seepage.
Q 5. what's the Compressive Strength of brick?
A. Second class brick-70kg/cm2
First class brick-105kg/cm2
Fire brick-125kg/cm2
Q 6. How does one check the standard of cement on the site?
A. 1. Date of Manufacturing:- Cement strength decreases with its age.
2. Color: it should be grey with light greenish shade and it should be uniform. Color gives a sign of excess lime or clay.
3. Float test: an honest cement won’t float if you throw a cement in water.
4. once you put your hand in cement bag you ought to feel cool.
Q 7. 1BHK full form ?
A.1 Bedroom, 1 Hall, 1kitchen
Q 8. What are the various sorts of Slabs?
A. There are 16+ differing types of slabs
Q 9. what's Initial & final setting time of concrete?
A. Intial Setting time : 30mins,
Final setting time : 10hrs
Q 10. what's durability?
A. Ability to face up to struggling is named Durability.
Q 11. What are the concrete tests?
A. Slump test, Compressive strength test, water permeability test, Water absorption test
Q 12. what's bleeding in concrete?
A. Bleeding is one sort of segregation, where water comes bent the surface of the concrete, being lowest relative density among all the ingredients of concrete.
Q 13. what's the name of the machine to urge compression test?
A. Universal testing machine (UTM)
Q 14. When we choose Pile foundation?
A. Pile foundation is adopted when the Soil bearing capacity is a smaller amount than 24KN/M3
Q 15. what's the function of stirrups within the column?
A. Stirrups are provided to handle the shear force and to carry the rebars (main bars) in position.
Reviewed by Digitech education
on
September 20, 2020
Rating:
No comments: